Tips to Get the Most Out of Your GPU Mining Rig

232
4149

Nowadays, people are busy mining Bitcoins. Serious miners opt for professional advice to professionally build their mining rigs to get the most out of their investment. While you can learn a lot by browsing the forums, nothing beats professional advice. While this guide doesn't focus on building a rig, it will help you get the most out of your rig. In addition, you can mine inexpensively. Let's get into the details.

Choose the right GPU

There are mainly two brands of GPUs namely Nvidia and AMD. We suggest you choose AMD. Another choice you need to make is to choose a GPU made by XFX or Shapphire. There is another option called Gigabyte MSI. Our recommendation is Shapphire. As far as our experience goes, Shapphire makes the highest quality graphics cards. After all, you can't afford to waste thousands of dollars just on graphics cards. Better to spend a little more and only go for high quality products.

Conductors

If you have 280-290 graphics cards, you can choose 15.12 drivers. However, for the latest cards, we suggest you download the latest drivers. Besides the pilot, you can also opt for the Radeon Chill.

System

Although a lot of people use Linux, we think nothing beats Windows. The reason is that the highest quality miners are designed for Windows operating system. In addition, Windows systems are easy to run.

When it comes to miners, Claymore has an excellent reputation. So we strongly suggest that you choose a Windows based miner.

Go for a minimum of 5 GPUs

A mining rig has many expensive components. So, it is not a good idea to save money on graphics cards. The point is, it just doesn't make sense. Ideally, you should go for a minimum of two cards.

In Windows 7, you cannot use more than 4 cards. However, if you download a special driver, you can also use more than 4 cards.

Windows 10 can detect all GPUs; however, this will consume a bit more of your platform's resources. The best option is Windows 7.

Use USB risers

Risers are the devices that allow you to connect your PC to the graphics card. Today, technology has allowed us to use USB risers due to their stability and efficiency.

Cool your GPUs

You know heat is killing electronics soon. The same goes for graphics cards. If you use your cards the right way, they will work for you for years to come.

All you have to do is remove the four screws from the board and stick some fresh paste on the GPU chip. That’s it. This will improve the heat transmission. As a result, you can keep your GPU cool for years to come. This will make your GPU outlast much longer than you expected.

Modify virtual memory

It is better to modify the virtual memory of your PC and put it at 16 GB.

So here are some steps you can take to make your mining rig more efficient.


Comments are closed.